Wolfspeed Power Applications Forum

Wolfspeed Technical Community:

SpeedFit™ Design Simulator

Simulate and evaluate the performance of SiC-based power circuits and determine the right SiC device in seconds.

Start a Simulation

Categories

CAB400M12XM3 LTSpice model

Options
altus22
altus22 Contributor Level 1
in Module Products

Hello. Can you please provide me with the LTSpice model for CAB400M12XM3? I did not see it in the all_sic_mosfet_ltspice_models.zip file. Thank you.

Tagged:

Comments

  • SiC_Power_Admin
    SiC_Power_Admin Wolfspeed Admin - Contributor Level 4
    Options

    Hi Altus - thanks for posting. Please give us a couple of days to get back to you.

  • DanMartin
    DanMartin Wolfspeed Employee - Contributor Level 2
    Options

    Hi Altus,

    We do not have SPICE models for the modules at this time. What are your objectives with the SPICE model? Take a look at this blog post: https://www.wolfspeed.com/knowledge-center/article/selecting-between-wolfspeeds-design-tools/ to see dependant the system parasitics are on SPICE model results. We recommend a mix of PLECS + evaluation hardware to get the most accurate results.

    BR,

    Dan

  • altus22
    altus22 Contributor Level 1
    Options

    Hi Dan,

    My objective with the SPICE model is to simulate the dv/dt with our motor and cables to try to estimate EMI and mitigation techniques. I will reread that blog post.

    Thank you,

    Chris

This discussion has been closed.