Wolfspeed Power Applications Forum

Wolfspeed Technical Community:

SpeedFit™ Design Simulator

Simulate and evaluate the performance of SiC-based power circuits and determine the right SiC device in seconds.

Start a Simulation

Categories

SpeedFit treatment of third quadrant conduction losses

Options
Matt
Matt Contributor Level 2
edited March 2023 in Module Products

Please could you advise the SpeedFit design simulator tool automatically includes the MOSFET's third quadrant conduction losses within the 'MOSFETs conduction' loss calculation? Thanks


image.png


Tagged:

Comments

  • ZMiller
    ZMiller Wolfspeed Employee - Contributor Level 3
    Options

    Hi Matt,

    Yes, the models used in Speedfit have fully modeled the third quadrant of the MOSFET and these losses are captured in the read-out after running the simulation.

    Thanks,

    Zack

  • Matt
    Matt Contributor Level 2
    Options

    Hi Zack, thanks for confirming this.

    Best regards

    Matt

This discussion has been closed.