Wolfspeed Power Applications Forum

Wolfspeed Technical Community:

SpeedFit™ Design Simulator

Simulate and evaluate the performance of SiC-based power circuits and determine the right SiC device in seconds.

Start a Simulation

Categories

Can I use KIT-CRD-8FF65P as an inverter?

aym12345
aym12345 Contributor Level 1
edited November 2023 in General

Can I use KIT-CRD-8FF65P as an inverter?

Tagged:

Comments

  • Forum_Moderator
    Forum_Moderator Wolfspeed Employee - Contributor Level 4

    Thank you for your post, it has been approved and we will respond as soon as possible.

  • AAnders
    AAnders Wolfspeed Admin - Contributor Level 4

    Hello,

    The KIT-CRD-8FF65P has a single half-bridge arrangement. Depending on what specific topology you are referring to, you would potentially need 2 of these boards to create a single phase inverter. This should be possible as long as you operate within the electrical and thermal ratings of the devices, however, we have not evaluated the performance of multiple boards operating in this fashion.

    Thanks,

    Adam

  • TBhatia
    TBhatia Wolfspeed Admin - Contributor Level 5

    Hi, I hope that this answered your question. I will close this discussion for now but if you have a follow up question, please "Start a New Discussion" and we would be glad to support you further.

This discussion has been closed.