Wolfspeed Power Applications Forum

Wolfspeed Technical Community:

SpeedFit™ Design Simulator

Simulate and evaluate the performance of SiC-based power circuits and determine the right SiC device in seconds.

Start a Simulation

Categories

Load Inductor for the DPT

Options
NilsL
NilsL Contributor Level 1
edited March 14 in General

Dear Wolfspeed Team,

I was wondering whether you know where it would be possible to aquire Bourns BS501145T air core inductor that you have suggested in your configuration sets for the DPT measurements. If it is not available anymore can you suggest any alternatives?

Kind regards,

Nils

Comments

  • Forum_Moderator
    Forum_Moderator Wolfspeed Employee - Contributor Level 5
    Options

    Thank you for your post, it has been approved and we will respond as soon as possible.

  • AAnders
    AAnders Wolfspeed Admin - Contributor Level 4
    Options

    Hello,

    The inductor is no longer in stock at distributors. The air core inductor for a DPT platform can be easily hand wound with common wire and a tube. Please refer to the post below for recommended construction techniques. Let me know if you have any further questions.

    Thanks,

    Adam

    https://forum.wolfspeed.com/discussion/585/air-core-inductor-selection-for-double-pulse-test

  • TBhatia
    TBhatia Wolfspeed Admin - Contributor Level 5
    Options

    Hi, I hope that this answered your question. I will close this discussion for now but if you have a follow up question, please "Start a New Discussion" and we would be glad to support you further.

This discussion has been closed.